HEALING WOUNDED CHOCOLATE MOLDS

community » Forums » Tech Help, Tips, Tricks, & Techniques » Page » HEALING WOUNDED CHOCOLATE MOLDS
Brian Donaghy
@brian-donaghy
02/27/09 11:26:30
58 posts
Susie.It's kinda hittin' a moving target. I have mould in my kitchen that I use very regularly that are older than two years but I don't wash (unless disaster strikes) and I am fairly gentle with but I also know confectioners that have gotten less than a year based on their use. As per your original question, you will know when they stop working. And I am interested to hear more about this Micro-Smooth.b
Susie Norris
@susie-norris
02/27/09 10:49:12
21 posts
Good to know. What would you say the maximum shelf life of a polycarbonate molds is, given regular weekly use, a weekly wash with no soap and proper storage (no dust or high heat)?
Clay Gordon
@clay
02/27/09 07:15:45
1,680 posts
From a web site selling Mikro-Smooth:
Because Mikro-Smooth contains only ultra-fine, completely inert particles [ Ed: ceramic] and distilled water, it cannot cause either short-term or long-term damage ...
Here's a description of how it works:
The physics are simple: a mass-produced CD or DVD, though it looks smooth, has substantial microscopic roughness at the surface being read by the CD/DVD player's laser beam. That micro-roughness causes audible jitter in the digital music data stream. Mikro-Smooth fluid uses highly uniform particles of two ten-millionths of an inch sizefar finer than conventional polishesto significantly smooth the playing surface's micro-roughness.
I will get in touch with the manufacturer and ask if its safe for human consumption.


--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@DiscoverChoc
Brian Donaghy
@brian-donaghy
02/27/09 07:10:10
58 posts
My concern about using an item that will remove scratches from a cd is its "food-safeness." Polycarbonate for food applications is food safe and so somewhat molecularly different than a non food-safe polycarbonate. Having said that, this product may actually speed up the degradation of the mould?Generally speaking the best solution for a mould is not to have a problem in the first place, I know that's kind of a cop out answer. We tend to recommend washing as little as possible but even with perfect conditions the mould is going to have a "shelf life" and wear out. This fact goes back to the molecular differences in food safe polycarbonate.brianCorporate Pastry ChefTomric Systems, Inc. www.tomric.com
Carlos Eichenberger
@carlos-eichenberger
02/27/09 06:48:43
158 posts
This may seem weird, and I must clarify that I have NOT tried this out; but for another purpose altogether, a company called Mapleshade Records makes a product called Mikro-Smooth. It is used for polishing CDs. I have brought back to life a few with scratches, and regularly polish any new CD that I buy. Since CDs are made from polycarbonate I figured Mikro-Smooth could also be used to re-smooth a mold's dull/scratched finish. A bottle of the stuff is $20 and lasts a long long time. They sell some pretty interesting CDs as well.
Susie Norris
@susie-norris
02/26/09 22:39:46
21 posts
I'll check it out. Gracias.
Clay Gordon
@clay
02/26/09 21:06:01
1,680 posts
Susie:Following is a link to the Micelli Mold Company web site. Micelli is the only US-based manufacturer of polycarbonate molds for chocolate production on the US. Their Contact page has a link to download a PDF file of mold washing instructions .:: Clay


--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
@DiscoverChoc
Susie Norris
@susie-norris
02/26/09 12:51:04
21 posts
They used to be shiny but now they are dull. I've replaced them with new ones, but there's something about an old polycarbonate mold you've used for years that you never want to let go. How do we restore luster to old molds that are still usable, just a little dinged on the corners and dingy on the inside from detergents or hard water particles? I know we're really not supposed to wash them, especially not with detergent, but sanitation concerns and hasty clean-up have left some damages: the missing shine of my wounded molds. Anybody know a cure?
updated by @susie-norris: 05/01/15 08:05:49

Tags

Member Marketplace

Activity

kapil jain
 
kapil jain
 
kapil jain
 
@kapil-jain • 7 years ago

Chocolatevenue is an online chocolate store in India.We are specialized in customized chocolates  .Chocolates can be customized as chocolate message and chocolate bars.

You can get written your message on chocolates and can get customized your chocolate bars by selecting the desired ingredients.

for more details

 

colorchocolate
 
@colorchocolate • 7 years ago

FOR SALE / BARGAIN / FINE CACAO LIQUOR, COLOMBIA ORIGIN

Enjoy a delicious premium chocolate from the Boyacá region of Colombia, considered among the best in the world. We offer a 200 kilograms lot of pure origin cocoa liquor,  fair trade / ethically sourced. N o other ingredients added.

The price for this high quality product is as follows:

1 kg - US$ 13

100 kg - US$ 12 per kilo

200 kg - US$ 11 per kilo

Inquires: equalcolombia@gmail.com

- See more at: https://www.thechocolatelife.com/colorchocolate#sthash.JFDWYFuK.dpuf

- See more at: https://www.thechocolatelife.com/community/forums/my_posts/18453/fine-cacao-liquor-colombia-origin#sthash.2pUq4Eu3.dpuf

Clay Gordon
 
@clay • 7 years ago

FCIA Recognition of Excellence Nominations close in one week:

Clay Gordon
 
The 4 Chocolatiers
 
@the-4-chocolatiers • 7 years ago

Two changes we made with the chocolate is that this time we winnowed the chocolate. This time we didn't use a blow dryer to melt the chocolate. Two improvements with the chocolate is that the melanger didn't get clogged this time and everyone put in work.