Chocolate will not release from the mold

Andre Costa
@andre-costa
09/21/09 21:05:07
103 posts
Very basic question, but this is the first time this happens to me.I am making filled bonbons and I am using two brand new magnetic molds I got from Chocolat-Chocolat.comI am also using, for the very first time, a Revolation 1 I recently purchased.The thing is, the bonbons will not come out of the molds...from either mold.I tested the chocolate from the Revolation and it looked tempered correctly.I don't know what could have caused my bonbons to get stuck on the molds. Any ideas?
updated by @andre-costa: 04/20/15 16:05:20
Brendan
@brendan
09/22/09 05:06:18
21 posts
They are not releasing because the chocolate did not contract, which indicates it did not properly crystallize. One possibility is that the chocolate was well-tempered but allowed to agitate too long and too many stable crystals formed in the machine (the chocolate would become more viscous in this case). The formation of stable cocoa butter crystals is what causes chocolate to contract when cooling, so if the crystals have already formed when the chocolate is poured into the mold, it will not exhibit the expected behaviour as it cools. Since melted chocolate becomes noticeably thicker as the stable crystals multiply, this is an easy issue to spot.More likely is that the chocolate was well-tempered when poured into the molds, but did not cool correctly. The thick polycarbonate of professional molds insulates your chocolate, trapping heat inside. The outer surface may begin to cool, but the warmer chocolate within the mold transfers its heat to the outer surface and interferes with crystal formation. In other words, because some of the chocolate in the mold is exposed to air and some isn't, it cools unevenly and does not set up properly. This problem becomes even worse when molding large masses of chocolate (bars and solid figures). Allow the chocolate to cool to the point where its surface has just gone from wet-looking to slightly matte. At this point it's beginning to crystallize. Ideally it should now be put in a cooler environment, say 10 degrees cooler than your workspace, with lots of air circulation, which is important to disperse the heat. If that's not an option, popping it into the fridge at this point should produce good results, though drastic temperature changes can cause cracking, condensation etc. Leave it in the cooler environment until the chocolate has fully pulled away from the sides of the molds, and allow to gradually return to room temperature before demolding. Lastly, always cool molds with the open side up, otherwise heat will be trapped within the cavity.
Diana
@diana
09/22/09 10:58:16
12 posts
Comprehensive advice there...my only point to add would be that possibly your layer of chocolate was too thin which can sometimes make release difficult.
Andre Costa
@andre-costa
09/22/09 12:22:27
103 posts
Brendan.Thank you for the explanation. Very helpful. I will see what changes I need to make in order to improve my unmolding!Thanks again.
Andre Costa
@andre-costa
09/22/09 12:23:17
103 posts
Diana,My shell is usually very thin, which is something I am quite proud of...lolIn any case, I will keep the information you gave in mind. That's a good trouble-shooting technique.Regards,Andre

Tags

Member Marketplace


Activity

kapil jain
 
kapil jain
 
kapil jain
 
@kapil-jain • 7 years ago

Chocolatevenue is an online chocolate store in India.We are specialized in customized chocolates  .Chocolates can be customized as chocolate message and chocolate bars.

You can get written your message on chocolates and can get customized your chocolate bars by selecting the desired ingredients.

for more details

 

colorchocolate
 
@colorchocolate • 7 years ago

FOR SALE / BARGAIN / FINE CACAO LIQUOR, COLOMBIA ORIGIN

Enjoy a delicious premium chocolate from the Boyacá region of Colombia, considered among the best in the world. We offer a 200 kilograms lot of pure origin cocoa liquor,  fair trade / ethically sourced. N o other ingredients added.

The price for this high quality product is as follows:

1 kg - US$ 13

100 kg - US$ 12 per kilo

200 kg - US$ 11 per kilo

Inquires: equalcolombia@gmail.com

- See more at: https://www.thechocolatelife.com/colorchocolate#sthash.JFDWYFuK.dpuf

- See more at: https://www.thechocolatelife.com/community/forums/my_posts/18453/fine-cacao-liquor-colombia-origin#sthash.2pUq4Eu3.dpuf

Clay Gordon
 
@clay • 7 years ago

FCIA Recognition of Excellence Nominations close in one week:

Clay Gordon
 
The 4 Chocolatiers
 
@the-4-chocolatiers • 7 years ago

Two changes we made with the chocolate is that this time we winnowed the chocolate. This time we didn't use a blow dryer to melt the chocolate. Two improvements with the chocolate is that the melanger didn't get clogged this time and everyone put in work.