CLOSED Mold decorating with colored cocoa butter

Dirke Botsford
@dirke-botsford
05/31/10 23:17:13
98 posts

This is probably an easy one for many of you but I'm at a loss. I colored some cocoa butter and painted it into my molds, no problem. Did all the chocolate and filling, everything went well until I un-molded. Some came out with a really great shine while others didn't?

Do I need to temper the cocoa butter? did I not chill the filled mold enough prior to unmolding? This was my first attempt at this. I love the look and want to experiment more but would love know where I might have gone wrong....any help would be appreciated.

Cheers.


updated by @dirke-botsford: 01/12/18 10:01:54
Carlos Eichenberger
@carlos-eichenberger
06/01/10 11:25:33
158 posts
Some people temper, some don't. I'm part of the "yes" crowd. I find that when I don't temper the CCB it gives inconsistent results. When I do, never a problem. Also depends on what technique was used: airbrush, finger, brush?I have a Hilliard's cooling cabinet, and usually leave the mold in the cooler for 1/2 hour after capping. After that we unmold basically just by flipping over and if necessary giving it a gentle tap.
Dirke Botsford
@dirke-botsford
06/01/10 11:34:49
98 posts
method: fingerSo how do you temper such a small amount of cocoa butter? do you seed it with cocoa butter? From what I've read the ideal temperature to work with it is 90 degrees? Everything looks except no shine.Appreciate the help
Sebastian
@sebastian
06/01/10 13:05:55
754 posts
Could be lots of things, from improper temper to dirty moulds to improper cooling.Some use a precoat of clear cocoa butter to boost the shine - it can work very very well. I'll often do it myself before layering color. Others simply start with the color, which can work well too. Some believe that if you start with solid cocoa butter and very gently melt it such that it's a finished temp of about 90F, the act of rubbing it into the mould with your finger may precipitate some xtallization - i'm not sure - perhaps it does. They key is to start with a room temp mould (oh, 70F or so) and not overheat your cocoa butter, and then properly cool it. Keep your RH at no more than 60% as well, as that can cause some sticking. Buffing your moulds with a cotton ball before you mould often helps as well.
Dirke Botsford
@dirke-botsford
06/01/10 14:58:23
98 posts
ah there's my problem.... I probably over heated it and the ones that turned out perfect where the last ones I worked on! Perfect! Thank you so much...I will try again and thanks for the tips.
Laura Marion
@laura-marion
06/01/10 17:58:47
27 posts
hi i temper coloured ccb as if it was dark chocolate so i put it down to 29 then up to 32 degrees i buff the mould with cotten ball and heat the mold a little bit to i never had a problem and i get a nice shine everytime
Kerry
@kerry
06/01/10 21:32:39
288 posts
I don't temper either - but I heat only to the point where there is still some unmelted coloured cocoa butter in the container. Most of the problems I've had related to cocoa butter that is too warm (or chocolate behind it that is too cool).If you put a drop in a mold that is too warm, you need to agitate it until it starts to crystallize - either with your finger or a paint brush etc.


--
www.eztemper.com

www.thechocolatedoctor.ca
Kata Pénzes
@kata-pnzes
03/19/11 06:41:29
1 posts

Hi,

i have also problems with the shine of the cocoa butter.

So i need to heat up to 40-45 than cool it down to 29 and then up to 32? I think that the inproper tempering makes my work dull.

I also would like to ask, what colours do you use with dark chocolate? I tried yellow, and green but they dont' look so good on dark chocolate.

Do you use cocolred cocoa butter in the paint gun in the same way?

Laura Marion
@laura-marion
03/19/11 18:38:08
27 posts

hi ok so i all ways temper the ccb by seading you can usually go as far as 33.2 degrees

with dark choc the colors don't come out as well not much you can do about that.

is using an airbrush always heat the gun and try to keep the movement steady

i also head my molds a lil bit to hope it helps
Erica Rodriguez-Anthony
@erica-rodriguez-anthony
03/11/13 17:17:44
13 posts

Can anyone suggest an online retailer wherecan I buy a kit of many different cocoa butter colors?

Thanks!

Clay Gordon
@clay
03/12/13 14:07:23
1,680 posts

Erica -

Have you taken a look at Chef Rubber?




--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
clay - http://www.thechocolatelife.com/clay/
Erica Rodriguez-Anthony
@erica-rodriguez-anthony
03/13/13 10:14:59
13 posts

Yes I have! In fact I sent them an email just a few hours before this post and a, waiting their response. I have the items in my shopping cart, just wanted to see the sources anyone else had, but thanks for the confirmation! :)

Erica

Tags

Member Marketplace


Activity

kapil jain
 
kapil jain
 
kapil jain
 
@kapil-jain • 7 years ago

Chocolatevenue is an online chocolate store in India.We are specialized in customized chocolates  .Chocolates can be customized as chocolate message and chocolate bars.

You can get written your message on chocolates and can get customized your chocolate bars by selecting the desired ingredients.

for more details

 

colorchocolate
 
@colorchocolate • 7 years ago

FOR SALE / BARGAIN / FINE CACAO LIQUOR, COLOMBIA ORIGIN

Enjoy a delicious premium chocolate from the Boyacá region of Colombia, considered among the best in the world. We offer a 200 kilograms lot of pure origin cocoa liquor,  fair trade / ethically sourced. N o other ingredients added.

The price for this high quality product is as follows:

1 kg - US$ 13

100 kg - US$ 12 per kilo

200 kg - US$ 11 per kilo

Inquires: equalcolombia@gmail.com

- See more at: https://www.thechocolatelife.com/colorchocolate#sthash.JFDWYFuK.dpuf

- See more at: https://www.thechocolatelife.com/community/forums/my_posts/18453/fine-cacao-liquor-colombia-origin#sthash.2pUq4Eu3.dpuf

Clay Gordon
 
@clay • 7 years ago

FCIA Recognition of Excellence Nominations close in one week:

Clay Gordon
 
The 4 Chocolatiers
 
@the-4-chocolatiers • 7 years ago

Two changes we made with the chocolate is that this time we winnowed the chocolate. This time we didn't use a blow dryer to melt the chocolate. Two improvements with the chocolate is that the melanger didn't get clogged this time and everyone put in work.